1. Type your dimensions
Fitted drawer organiser bin
Open bin with a floor, four walls and an optional grid of dividers, made to the outer width, depth and height you measure in your drawer.
Printing notes for this model
2. Check and download
Preview
Drag the picture to rotate it, or focus it and use the arrow keys.
Starting the generator.
- Bounding box (X x Y x Z)
- -
- Triangles
- -
- Estimated solid volume
- -
- STL file size
- -
Binary STL in millimetres. The volume is the solid plastic of the part, before your slicer applies infill.
What this page is
A single-page generator for one part: a drawer organiser bin with a floor, four outer walls and, if you want them, dividers. The STL is generated by software from your own dimensions. There is no ready-made model file behind this page and no part is modelled individually.
- Everything runs in your browser. The page sends nothing and asks for nothing after it has loaded: your measurements and the finished file stay on your device.
- Before the download is enabled, the page checks in your browser that the generated mesh is a closed solid: every edge shared by exactly two triangles, no flipped faces, positive volume, and a bounding box that matches the requested outer size within 0.01 mm.
- Walls thinner than 0.8 mm and parts larger than 400 mm on any axis are refused, with a message that says which value to change.
More part types in the full generator
This page holds the one free part type. The full generator has the same bin and five paid part types: pipe and cable clips, hex bit holder strips, screwdriver racks, bins on a 42 mm base grid and drill guide jigs. One $7 licence key opens those five.
Get a licence key on Gumroad ($7) One payment, one key for the five paid part types. This free page needs no key.
Before you print
Generated by software
The STL files are generated by software from your own dimensions. The result is only as accurate as the measurements you type in, and your printer and material add their own tolerances: print one bin and try it before you print a batch.
Provided as-is
Parts are provided as-is. You are responsible for checking fit, material and load suitability for your own use. The parts are not safety-rated and are not for structural, medical or safety-critical use.
Licence
Personal and commercial use of the STL files you download: you may print them, use the prints, and sell the prints. No resale or redistribution of the generator itself, which includes this page, its code and its model recipe.